加入收藏
电邮
打印文章
写信给编辑 
技术参数/SPECIFICATION:
| 型号 MODEL | RMX850 | RMX1450 | RMX1850 | RMX2450 | RMX5050 | |
|---|---|---|---|---|---|---|
| 桥接单声道输出 Bridged mono output4Ω | 1200W | 1600W | 2200W | 2600W | 5400W | |
| 桥接单声道输出 Bridged mono output8Ω | 900W | 1200W | 1650W | 1950W | 4050W | |
| 立体声输出功率 Stereo output power 4Ω | 2X450W | 2X600W | 2X825W | 2X975W | 2X2025W | |
| 立体声输出功率 Stereo output power 8Ω | 2X300W | 2X400W | 2X550W | 2X650W | 2X1350W | |
| 频率响应 Frequency Response | 20Hz-20KHz±0.3dB | |||||
| 总谐波失真 THD | <0.05% 8Ω 1kHz | |||||
| 信噪比 S/N Ratio | >98dB | |||||
| 瞬态响应 Slew Rate | 30~45V/uS | |||||
| 阻尼系数 8Ω Damping coefficient | >300 | |||||
| 通道间串音 Crosstalk between channels | >100dB@8Ω 1KHz | |||||
| 输入阻抗 Input impedance | 20kΩ(Balance)/10KΩ(Unbalance) | |||||
| 输入灵敏度 Input Sensitivity | 0.755V/1.0/1.4(mv/8Ω) | |||||
| 高度 Height | 2U | 3U | ||||
功能特点: ◎输入有平衡、不平衡两种方式，有立体声、单声道、桥接三种不同工作模式 ◎采用继电器延时电路实现开机软启动，从而保护了扬声器免受开机的冲击 ◎所有机型具有可靠的开机延迟、过载、过温、零飘等多重保护 ◎采用进口高精密长寿命31点步进电位器，精确控制输出功率 ◎采用8个63V/10000uf滤波电容、优质环形低漏磁变压器和高品质音频大功率 输出管 ◎采用低噪音风扇近距离散热，温度升至105℃时自动断开输出以保护机器不 受损坏，待温度降至85℃时自动恢复工作 ◎采用最新接地技术使噪音降至最少 ◎采用最新PRO技术设计电路板，使电路板的性能更稳定 Features: ◎Input has balanced and unbalanced. There’re three models including stereo, mono and bridge. ◎Soft starting protect speakers attack from power-up ◎Multiple protection prevent power up delay, over load and over heat ◎Used the durable 31point potentiometer to make sure output can be controlled accurately. ◎Good annular low leakage transformer and high-power audio output tube which adopt 8 filter capacitors of 63v/1000uf ◎Used the lowest noise fan to get rid of heat, it can self-disconnection output when the temperature up to 105℃ and it can self back to work when the temperature down to 85℃ ◎The new technology makes the lowest noise ◎The function of circuit board is more stable because of its PRO technology. | ||||||
